Truck Scale with Analogy Loadcell Weighbridge (SCS)

Truck scale

Model Number: SCS
 
Length--5m, 6m, 7m, 8m, 9m, 10m, 12m, 14m, 16m, 18m, 20m, 22m, 24m

Width--3m, 3.2m, 3.4m, 3.5m

Quantity of moudle: 2 pics, 4, pics, 6 pics, 8 pics

Parameters

Capacity30t~150t

Scale Division: 1/3000

Antiseptic Class: SA 2.5

Safe Load Limit: 125%

Tortuosity: 1/1000

Safe factor: 2.5

TWO KINDS OF LOADCELL weighbridge

--QS loadcell

Rated load: 5, 10, 15, 20, 25, 30, 40, 50t

Sensitivity: 2.0± 0.002 mV/V

Total error: ± 0.02%F. S, ± 0.03%F. S

Creep(30min): ± 0.02%F. S

Zero balance: ± 1%F. S

TCO: ± 0.02%F. S / 10° C

TC SPAN: ± 0.02%F. S / 10° C

Input resistance: 750± 10 Ω

Output resistance: 703± 2 Ω , 703± 5 Ω

Insulation resistance: ≥ 5000 MΩ

Operating Temp Range: -30~+70° C

Safe load limit: 150, 12040~50t%F. S

Over load limit: 150, 12040~50t%F. S

Recommend excitation: 10~12V DC

Maximum excitation: 15V DC

Protection Class: IP67(5t), IP68(10~50t)

Construction: Alloy steel

Cable: Length=L: 5.2m(5t), 8m(10t), 10m(15t), 12m(20, 25, 30t), 16m(40~50t)
Diameter: φ 6mm

ZS loadcell

Rated load: 10, 15, 20, 25, 30, 40, 50t

Sensitivity: 2.0± 0.002 mV/V

Total error: ± 0.02%F. S, ± 0.03%F. S

Creep(30min): ± 0.02%F. S

Zero balance: ± 1%F. S

TCO: ± 0.02%F. S / 10° C

TC SPAN: ± 0.02%F. S / 10° C

Input resistance: 400± 10 Ω , 750± 10 Ω

Output resistance: 352± 3Ω , 703± 3 Ω

Insulation resistance: ≥ 5000 MΩ

Operating Temp Range: -30~+70° C

Safe load limit: 150%F. S

Over load limit: 250%F. S

Recommend excitation: 10~12VDC

Maximum excitation: 15V DC

Protection Class: IP68

Construction: Alloy steel

Cable: Length=L: 8m(10t), 10m(15t), 12m(20, 25, 30t), 16m(40~50t)
Diameter: φ 6mm

INDICATION:
Weighing indicator XK3190-D10 adopts highprecision A/D conversion technology, widelyapplied in electronic floor scale, electronic truck scale, static railway scaleand so on alike static weighing system equipped with 1~8 load cell.

Features of truck scale with load cell
- A/D conversion with readability1/30000
- Use inner code to replace weight observing and analysis tolerance
- Zero range setup (auto/manual)
- Non-linearity and calibration tolerance correction
- Password management and timing power off function
- Auto/manual, condition/non-condition, daily/sorted report print setup
- Fast filled weighing bill print setup
- Save 1500 vehicle ID/net weight, 201 cargo ID/cargo name, 100 customerID/customer name, 100 notes and 1501 weighing records
- Weighing data save protection in case of power off
- Input character with keyboard or download from PC
- Good consistency
- Hardware detection and voltage display of load cell signal

Parameters of indication
Model: D10/D10P
Input signal range: -30mV~30mV
Input sensitivity: ≥ 1μ V/e
Load cell Excitation: DC 5V
Max load cell connection: 8 at 350ohm or 16 at 700ohm
Display: 7 bits LED, 7 status indications

Matters need attention
1. We can use the load cells which chosen by customers no mater the standard or the brand.
2. The quotation is changed with the Chinese steel price, VALIDITY DATE is one month if the order havent taken effect in one month, it needs new quotation.
3. We can produce the customers structure.
4. We render services of professional strength and safety factor calculation.